Intank Booster Systems Calculator
TRAINERS
Intank Booster Systems Designed for Restricted Spaces
Intank booster systems are a practical solution where incoming mains pressure is insufficient or where plant room space is limited.
Our intank booster systems are designed to sit directly within cold water storage tanks, providing reliable pressure boosting while minimising footprint, pipework changes and installation disruption.
We design, supply, install and commission intank boosters for commercial, industrial and specialist applications.
When an Intank Booster System Is the Right Choice
An intank booster system is typically recommended where:
Incoming mains pressure is inadequate
Space is limited within the plant room
A traditional booster set cannot be accommodated
Existing cold water storage tanks are already in place
System reliability and redundancy are critical
Our engineers assess each site to determine whether an intank booster provides the most effective and efficient solution.
How Our Intank Booster Process Works
Step 1 – System Assessment & Requirements
Using our intank booster calculator, we gather key details including:
Required flow and pressure
Tank size and configuration
Existing system details
Access and installation constraints
Images of your existing tank or pump setup can also be uploaded to help our team assess suitability.
Step 2 – Intank Booster Design & Selection
Based on your requirements, we design an intank booster system that:
Fits within your existing tank
Meets performance requirements
Complies with relevant standards
Supports redundancy where required
All designs are reviewed by experienced pump engineers to ensure long-term reliability and serviceability.
operates correctly from day one.
Step 3 – Installation, Commissioning & Testing
Once agreed, we manage the full process:
Supply of intank booster components
Installation within the storage tank
Integration with controls and pipework
Commissioning and performance testing
Handover and documentation
This ensures the system operates correctly from day one.
Booster Set Builder
Calculate your flow requirements and submit an enquiry to our engineering team.
FLOW RATE CALCULATOR
Fixture Count
Enter the number of each fixture type in your system:
PRESSURE REQUIREMENT
Pressure Requirement
GET RESULTS OF SUITABLE BOOSTER SETS
Our engineering team will review your requirements and contact you within 24 hours.
Click to upload or drag & drop
Photos of existing pump, nameplate, or plant room
Max 5MB per file • JPG, PNG, PDF, DOC
By submitting this enquiry, you agree to our processing of your data for the purpose of providing a quotation. We will not share your details with third parties.
How It Works
- Calculate: Enter your fixtures and pressure requirements
- Submit: Send your enquiry with optional photos
- Review: Our engineers assess your needs (within 24 hours)
- Consult: We contact you to discuss solutions
- Quote: Receive a tailored proposal
💡 Why Choose NT Cloke?
- Full supply & installation service
- Bespoke and off-the-shelf solutions
- Minimal downtime installations
- 20+ years of engineering experience
NATIONWIDE SUPPORT
Wherever you are, our team can have an engineer to you across the UK.
EXPERIENCED ENGINEERS
Over 50 years team experience working with water & heating pumps.
ALL MAKES & MODELS
Our team can repair, manage & install any make and model of pump.
CALL OUTS
Professional support & a vow to help over the phone before visiting your property.
TRAINERS
Impartial Pump Selection – for Intank Boosters
We are not a pump manufacturer and are not tied to any specific brand.
This allows us to:
Select intank booster pumps based on performance and reliability
Recommend options across different budgets
Work with all major makes and models
Ensure the system is designed around your application, not a product range
Our advice is always impartial and engineering-led.
Complete Support for Intank Booster Systems
Our intank booster systems are designed not only to solve pressure and space challenges, but to perform reliably long after installation. By providing full lifecycle support, we ensure your system remains compliant, efficient and fully supported throughout its operational life.
Ongoing Servicing & Preventative Maintenance
Regular servicing is essential for intank booster systems operating within storage tanks. We provide planned maintenance and servicing to keep systems operating efficiently, reduce the risk of failure and extend equipment lifespan.
System Management & Performance Monitoring
We support the ongoing management of intank booster systems, carrying out performance checks and system assessments to ensure pressure, flow and controls continue to operate as intended under real-world conditions.
Fault Diagnosis & Emergency Call-Outs
If issues arise, our engineers provide fast fault diagnosis and emergency call-out support. With direct knowledge of the installed system, issues can be identified and resolved quickly, minimising disruption to water supply.
System Upgrades & Improvements
As site demands change, we can upgrade or improve existing intank booster systems. This may include pump upgrades, control changes or performance improvements to meet new usage or compliance requirements.
Intank Booster Set Build Calculator FAQs
An intank booster system is a pressure boosting solution installed directly inside a cold water storage tank. It is commonly used where space is limited or where incoming mains pressure is insufficient.
Yes. Intank booster systems are widely used in commercial and industrial settings, particularly where reliable pressure and redundancy are required and plant room space is restricted.
In some cases, yes. Our engineers will assess whether an intank booster can replace or supplement an existing system based on performance requirements and site constraints.
Yes. We provide full installation, commissioning and ongoing support for all intank booster systems we supply.
No. We are completely impartial and work with all major pump manufacturers, selecting equipment based solely on suitability, reliability and value.
About NT Cloke Pumps & Water FAQs
NT Cloke Pumps & Water are specialist pump engineers providing expert support for booster systems, water pressure boosting and pump installations. We work with commercial, industrial and specialist applications across the UK.
We provide a complete end-to-end service. This includes:
Booster pump supply
Installation and replacement
Commissioning
Ongoing servicing and maintenance
Very few companies in the UK offer this full level of support under one roof.
No. We are completely impartial. As we are not a pump manufacturer and have no brand affiliations, our recommendations are based solely on what is best for your system. We work with all major makes and models of booster pumps.
Yes. In addition to new installations, we manage, service and maintain existing booster systems, including like-for-like replacements, upgrades and fault diagnosis. This ensures long-term reliability and compliance.
Unlike suppliers who only sell equipment, we combine:
Engineering-led recommendations
Impartial pump selection
Installation and commissioning
Ongoing service and support
This means clearer accountability, better system performance and long-term peace of mind.
